Day: October 28, 2022

The Advantages of Pipe Snaking

6 Key Benefits Of Professional Drain Cleaning Service | HL Bowman

Pipe snaking is a process that involves snake-like tools that snake your pipes. You can buy a snake or auger and learn how to use it. In addition to its uses, pipe snaking also has its advantages. Read on to learn more about this method. If you have a blocked drain, pipe snaking can help.


Using pipe snaking Citra Fl can be wise if you need to clear clogs in your pipes. This tool will help you clean your pipes effectively and is relatively inexpensive. However, it would help if you were careful when using it. You could easily damage your pipes if you need to know what you’re doing.

Before using a snake, make sure to read the manufacturer’s instructions. You may need to push the snake into the opening of the drain, and you must rotate it at a steady speed. Please don’t force it down the drain, as this could damage it. Also, when using the snake, apply pressure to its handle to help it pass the trap. Ideally, it will pass through without catching anything.


The first step to snaking a drain is locating the drain’s access point. For sinks and toilets, the access point is below the P-trap. Otherwise, it is necessary to snake around the bowl and down the drain. For bathtubs and showers, snake the drain through the bowl.

While trying to clear the drain, try to remove any objects or debris blocking it. In addition, make sure to avoid hot water, which could damage the pipes. Also, avoid forcing the snake through the drain, as you could rip the drain entrance and cause additional damage. For this reason, the head of the snake should not be longer than the length of the pipe it is trying to clear.

Once you’ve loosened the clog, you may want to uncoil the snake. A slacker snake will require less force. Lastly, keep the snake’s handle as close to the drain as possible, and rotate the snake in a steady rhythm. Using the snake to clear a drain may take several tries, so don’t be discouraged if it doesn’t clear the clog on the first attempt.


It would help if you used the correct techniques when using a pipe snaking augur to clear clogs from pipes. First of all, be sure to wear rubber gloves and goggles. Also, make sure you have a bucket handy to catch any water. Next, insert the snake into the drain. You should do this slowly and carefully. Once the snake has entered the drain, you should uncoil the snake to feed it down the pipe. Usually, you may have to try a few times to get the snake working in the drain. After this, slowly crank the handle to let it descend.

When using a pipe snaking augur, ensure that the drill handle points toward the main drain. Also, avoid allowing the snake’s cable to jam into the pipe. This will prevent it from working correctly